FANDOM



This command will pitch the camera upwards.

Syntax
PITCH CAMERA UP Angle Value
PITCH CAMERA UP Camera Number, Angle Value
Parameters
Camera Number

Integer
The camera number Angle Value Float
The value of the angle can be positive or negative

Returns

This command does not return a value.

Description

The rotation is independent of any axis orientation and allows free motion. The value of the angle can be positive or negative. The angle must be specified using a real value.

Example Code
autocam on

make matrix 1,4000,4000,100,100

set matrix height 1,50,50,500

update matrix 1

while mouseclick()<>1

set cursor 0,0

print "USE ARROW KEYS TO ROTATE / A+Z Roll Camera"

if upkey()=1 then pitch camera up 0,1

if downkey()=1 then pitch camera down 0,1

if leftkey()=1 then turn camera left 0,1

if rightkey()=1 then turn camera right 0,1

if inkey$()="a" then roll camera left 0,1

if inkey$()="z" then roll camera right 0,1

endwhile

while mouseclick()=1 : endwhile

delete matrix 1:autocam off

end
Community content is available under CC-BY-SA unless otherwise noted.